CATV Cable Complete Production Line,Algeria 12 Years Export Team
Support
CATV Process
1. copper wire twist
2. copper wire insulation
3. 2 cores twist
4. braiding
5. sheath
6. packing
1.copper wire twist
Application of the equipment
It is suitable for stranding of the copper wires with more than
seven strands, such as electronic wires, power wires, bare copper
wires, network wires, etc
500 DOUBLE TWIST BUNCHING MACHINE |
Model No. | | | |
Copper wire Dia. | | | |
Twisting sectional area | | | |
| | | |
Twisting pitch range | | | |
Traversing type | transverse and distance can be adjusted by bearing bransverse |
Bobbin loading & unloading type | |
Bobbin Dia. | | | |
Brake system | |
Motor power | | | |
Main shaft center height | | | |
Auto stop unit | auto stop when reach setting length, and wire broken inside and
outside |
Operating direction | |
2.copper wire insulation--70 PE insulation line
Apply to PE insulation in electrical wire and power cable etc extruding.
Finish OD :1mm-12mm
Extruder capacity:100 kg/hr ( PE )
Wire concentricity:above 95%
Line speed:According to wire diameter 200-350m/min
Central Height of machine:1000mm distance to ground
Power:3 phase 380V, total power 40KW
3.braiding machine--16 spindle braiding machine
Application
Applied to the shielding or braiding of all kinds of high quality
electric wire , computer wire etc
Specification And Parameters
Braiding direction:Vertical
Bobbin number:16(8 is inside,8 is outside )
Bobbin size:80mm x 22mm x 80mm
Bobbin speed:50-150rpm
Braiding pitch:3.2-35.5mm or 6.4-65mm
Braiding cable diameter:Max.14mm
Produce speed :Max.485 m/hour(7-8m/min)
Braiding wire material :0.1-0.2mm,Al,Mg wire,copper wire etc
4. PVC sheath -- 80 Extrusion Machine
This equipment is applicable to outer surface extrusion of wires
and cables for insulation materials with PVC
Technical Characteristics
1.Extrusion Wire Gauge:decide by customer
1) Inlet Wire Diameter:1mm-12mm
2) Finished Wire Diameter:2-20mm
2. Screw Diameter: the screw diameter is 80 mm.
3. Extrusion Capacity (when the head is turned on):Φ80 Machine =max
200 kg/hr
4. Linear Velocity:250 m/min
5. Length of Production Line:26 m
6. Installed Capacity:about 60 KW/hr
Finish products
Q:What HOOHA can support us if we are going to the wire and cable
field ?
A:HOOHA is a manufacturing and trading combo for wire and cable
industry field , with more than 15 years full experience and a
professional team on sales and technical.
At HOOHA our mission is to be a team of highly skilled experts who
collaborate to bring the best quality products, custom solutions,
and innovative thinking to our customers.
1. Our pre-service team for machine designer ( 5 member) and wire
and cable engineering (5) are over 15 years experience;
2. After service on electricity engineer (10), machinical
engineer(8),software engineer(5) are over 10 years experience;
3. Sales team who is specialized in wire and cable engineering
field ( 10 ) , are over 8-10 years experience in focus ;
4. Production self-inspection team (5),are over 15 years
experience.
5. FAQ
1.Who are we?
Hooha company Limited is based in Hongkong, china.Factory is
located in dongguan,China.Established in 2003, with 19 years of
experience in wire and cable field trade.It only takes 1 hour from
our company to guangzhou/shenzhen airport.
2.How can we guarantee quality?
1.Online inspect facotry,production,shipment,and aftersales
services.
2.pre-production sample before mass production.
3.Highstandards and strict requirements, key accessories of cable
equipment only use imported parts.
4.Mechnical parts gurantee 12months, elcctrical parts 12 months.
5.online communication,remote assistance,solve customer problem 24
hours,when the problem can not solved online,we will dispatch
engineer to go aboard to the problem on-site for the customer.
3.What can you buy from us?
1.material for wire and cable
2.turkey project for wire and cable
3.extrusion line/bunching/twisting
machine for wire and cable
4.accessorries for cable equipments
4.How long is your delivery time?
1.Generally, 3-7 days for goods in stock
2.30 days for goods after realsing order.
3.project will take 60-90 days
5. Will the price be cheaper if the order is placed in bulk?
Yes,Of course,it will make 10%-12% discount
6.What services can we provide?
1.Plant solution and machine design.
2.technical support at machines and cable
3.Installtion and commmsioning,after sales service.
4.Packaging customization 5.Customized,saving 10%-20% year-on-year
cost
7.HOOHA cable equipment technical advantages
1.In order to ensure the high quality of products,we start from
ensuring the accuracy of accessories, and the main accessories of
products(Casing, end cover, shaft and wheel) they are all
manufactured by CNC machining center,The main purchased parts are
NSK Bearings from Japan,American gates belt,taiwan TTO Fluoro
rubber oil seal,The working efficiency of the equipment is
improved, the noise is reduced, and the service life of the
equipment is extended to more than 10 years.
2.High precision dynamic balancing of all equipment rotors,The
dynamic balance level is G1, reducing the unbalance to less than
1G, and the long-term operation is safe and reliable.
3.The bearing adopts double row cylindrical roller bearing and
double row self-aligning roller bearing,compared with
the deep groove ball bearing, the bearing has high fatigue
strength, long service life, stable operation and small vibration.
